3 Vehicles Tips from Someone With Experience

How to Choose the Right Coolant for Your Truck It is advisable to use the right coolant to ensure your vehicle engine stays in great condition. However, when it comes to trucks, you need to use special coolant for their engines. The coolant requirements for trucks is different from that of small cars due to the heavier load they carry. You should do your research well to find the right truck coolant to buy. Using the right coolant will ensure that the engine does not overheat or get damaged. Which Coolant Should You Use? There are many types of antifreeze or coolant that may work for your truck. Majority of the coolants are either made of ethylene glycol or propylene glycol. If you are using ethylene glycol, handle it with extreme care since it is very toxic. Make sure that the coolant is not allowed to drain into the water table. The national authorities have rated propylene glycol safer than ethylene glycol and this explains why it is more popular among truckers. The compound is used in all types of coolants including aircraft de-icing, toiletries and foods. However, just like is the case with ethylene glycol, the propylene glycol should not be allowed to drain into the water table.
Case Study: My Experience With Coolants
Generally, you should ensure that water and the engine coolant are mixed in the ratio of 50/50. Your mixture should never contain less than 40% of water. Majority of people know that the coolant’s work is to keep the engine from freezing. While this is one of the functions, it is not the main one. The mixture helps to increase the boiling point and lower the freezing point. This function is more important. If you do not use the right coolant, corrosion and rust as well as cylinder wall cavitation can result. Your engine may die due to these occurrences.
How I Became An Expert on Vehicles
Check the Freezing Point If you live in an area that is usually cold, you should keep the concentration of propylene glycol high. The reason for this is due to the inefficiency of the compound in lowering the freezing point.This is because the compound is not efficient in lowering the freezing point. For people living in warm climate areas, keep in mind that propylene glycol transfer heat fast. If you will be hauling large loads over uneven terrains, this is the coolant you should use. Making the Right Mixture You should not use tap water to dilute concentrated engine coolant. The water can cause scaling of in the engine. To dilute the engine coolant, use de-ionized or distilled water instead. It is advisable to purchase pre-diluted coolant rather than a concentrated one. You should carry out a thorough research to determine the right coolant to buy. The above are some tips that will help you find the right coolant.